3.1 SERVICE INFORMATION DISPLAY (GENERAL DESCRIPTION)

This Movie Camera has SERVICE INFORMATION DISPLAY function which enables quick trouble-shooting.
The Service Information Display is available with the following prcedures.
The Service Information is displayed on the EVF and LCD monitor. (There are 4 kinds of SERVICE MODES as follow.)

In the OSD Line Output Mode, the service Information can be displayed even on TV.

MODE NAME	FUNCTION	How to use.
OSD Line Output Mode	Checking the EVF information on the TV monitor	Push the following keys simultaneously more than 2 sec.
		FOCUS/SET	STOP	DATE/TITLE
		(SIDE CASE(R))	(TOP PANEL)	(SIDE CASE (L) TOP)
SERVICE MODE 1	Remaining Battery A/D value./Safety Device/Capstan/Cylinder injuctions.	Push the following keys simultaneously more than 2 sec.
		COLOR	STOP	DATE/TITLE
		(SIDE CASE(R))	(TOP PANEL)	(SIDE CASE (L) TOP)
SERVICE MODE 2	Remaining Voltage A/D value./Mechanism position/Serial key code	After chosing SERVICE MODE 1, push [DATE/TITLE] key.
SERVICE MODE 3	ERROR CODE Display	After chosing SERVICE MODE 2, push [DATE/TITLE] key.
SERVICE MODE 4	PG SHIFTER ADJUSTMENT	After chosing SERVICE MODE 3, push [DATE/TITLE] key.

NOTE1:

The content of all service modes (service Mode 1 to 4) are the same as previous models.

Please refer to the following Technical Information.

Order number for Technical Information : VMD9512M138

NOTE2:

When an undesirable condition occurs, the power will be turned off except zoom& focus motor lock condition. (Since this model,“ERROR CODE” is not automatically displayed on the EVF and LCD monitor, even the CAMERA LEDis not flashed.)

By turning on Service Mode 3, it is possible to check what kind of undesirale condition has occurred, even after the ERROR CODE has disappeared. Because of The ERROR CODE is memorized to EEPROM-IC.

TOP PREVIOUS NEXT